Figure 1: Sybase "dump database" output

Backup Server session id is:  10.  Use this value when executing the
'sp_volchanged' system stored procedure after fulfilling any volume
change request from the Backup Server.
Backup Server: 6.28.1.1: Dumpfile name 'PROD_DB9608210E08 ' section
number 0001
mounted on tape drive '/dev/nrmt0h'
Backup Server: 4.58.1.1: Database PROD_DB: 263652 kilobytes DUMPed.
Backup Server: 4.58.1.1: Database PROD_DB: 501304 kilobytes DUMPed.
...
Backup Server: 4.58.1.1: Database PROD_DB: 20678478 kilobytes DUMPed.
Backup Server: 4.58.1.1: Database PROD_DB: 20909870 kilobytes DUMPed.
Backup Server: 6.47.1.1: OPERATOR: Mount the next volume to write.
Backup Server: 6.78.1.1: EXECUTE sp_volchanged
@session_id = 10,
@devname =
'/dev/nrmt0h',
@action = { 'PROCEED' | 'RETRY' | 'ABORT' },
@vname =
<new_volume_name>
Backup Server: 6.28.1.1: Dumpfile name 'PROD_DB9608210E08 ' section
number 0002
mounted on tape drive '/dev/nrmt0h'
Backup Server: 4.58.1.1: Database PROD_DB: 21167924 kilobytes DUMPed.
Backup Server: 4.58.1.1: Database PROD_DB: 21421826 kilobytes DUMPed.
...
Backup Server: 4.58.1.1: Database PROD_DB: 24393196 kilobytes DUMPed.
Backup Server: 4.58.1.1: Database PROD_DB: 24701500 kilobytes DUMPed.
Backup Server: 3.43.1.1: Dump phase number 1 completed.
Backup Server: 4.58.1.1: Database PROD_DB: 24892708 kilobytes DUMPed.
Backup Server: 4.58.1.1: Database PROD_DB: 25140346 kilobytes DUMPed.
Backup Server: 3.43.1.1: Dump phase number 2 completed.
Backup Server: 4.58.1.1: Database PROD_DB: 25423286 kilobytes DUMPed.
Backup Server: 4.58.1.1: Database PROD_DB: 25680334 kilobytes DUMPed.
Backup Server: 3.43.1.1: Dump phase number 3 completed.
Backup Server: 4.58.1.1: Database PROD_DB: 25937382 kilobytes DUMPed.
Backup Server: 6.45.1.1: Be sure to remove the tape/floppy from drive
/dev/nrmt0h (server: , session id: 10).
Backup Server: 6.45.1.1: Be sure to remove the tape/floppy from drive
/dev/nrmt0h (server: , session id: 10).
Backup Server: 3.42.1.1: DUMP is complete (database PROD_DB).