Listing 1: Sample run of netconfig
# netconfig Currently configured chains: 1. lmxc->sco_nb->sco_tcp lmxc SCO LAN Manager Client sco_nb SCO TPI NetBIOS for TCP/IP sco_tcp SCO TCP/IP for UNIX 2. nfs->sco_tcp nfs SCO NFS Runtime System for SCO Unix sco_tcp SCO TCP/IP for UNIX 3. sco_tcp->ppp0 sco_tcp SCO TCP/IP for UNIX ppp0 PPP Interface 0 4. sco_tcp->lo0 sco_tcp SCO TCP/IP for UNIX lo0 SCO TCP/IP Loopback driver 5. sco_tcp->sl0 sco_tcp SCO TCP/IP for UNIX sl0 SLIP Interface 0 6. sco_tcp->wdn0 sco_tcp SCO TCP/IP for UNIX wdn0 SMC/WD 8003/8013 Series driver, board 0 Available options: 1. Add a chain 2. Remove a chain 3. Reconfigure an element in a chain q. Quit Select option: 1 Num Name Description 1. lmxc SCO LAN Manager Client 2. nfs SCO NFS Runtime System for SCO Unix 3. sco_tcp SCO TCP/IP for UNIX Select top level of chain to Add or q to quit: 3 Add chain : sco_tcp-> Num Name Description 1. ctr0 Compaq Token Ring driver, unit 0 2. e3A0 3Com 501 Ethernet driver, board 0 3. e3B0 3Com 503 Ethernet driver, board 0 4. e3D0 3Com 507 Ethernet driver, board 0 5. exos0 Excelan 205 Ethernet driver, board 0 6. hpe0 HP EISA-32 Slave LAN Adapter 0 7. hpi0 HP ISA(AT) LAN Adapter 0 8. i3B0 Racal InterLan LLI ES-3210 STREAMS Driver, board 0 9. i6E0 Racal InterLan LLI NI-6510 STREAMS Driver, board 0 10. lo0 SCO TCP/IP Loopback driver 11. nat0 Novell NE2000 Ethernet driver, board 0 12. ne0 Novell NE3200 Bus Master Ethernet Driver, unit 0 13. ppp0 PPP Interface 0 14. ppp1 PPP Interface 1 15. sl0 SLIP Interface 0 16. sl1 SLIP Interface 1 17. tok0 IBM Token Ring Network Adapter driver, board 0 18. wdn0 SMC/WD 8003/8013 Series driver, board 0 19. wdn1 SMC/WD 8003/8013 Series driver, board 1 Select next level of chain to Add or q to quit: 14 Add chain sco_tcp->ppp1 (y/n): Adding: sco_tcp->ppp1 Configuring PPP Interface ppp1 Installing SCO TCP/IP over ppp1 Please enter the following information in order to configure ppp1 Enter the internet address of this interface: 198.73.137.121 Enter the netmask for this interface (default: 255.255.255.0): [CR] Enter the internet address of the destination interface: 198.73.137.120 Enter hostname of the destination interface: ge-ppp6 Interface Address: 198.73.137.121 Netmask: 255.255.255.0 Destination Address: 198.73.137.122 Destination host name: gw-ppp6 Are these values correct? (y/n): y WARNING: The selected values: 198.73.137.121 topgun topgun.Choreo.CA May conflict with other entries. Edit /etc/hosts to resolve the problem. Adding host topgun.Choreo.CA to /etc/hosts Adding host gw-ppp6 to /etc/hosts Updating /etc/ppphosts Updating /etc/pppauth Warning: For PAP to function correctly, please put 'topgun hello' in remote machine's /etc/pppauth. Warning: Please add gw-ppp6 to the uucp Systems file (/usr/lib/uucp/Systems). Refer to Configuring PPP section of the TCP/IP Administrators Guide Warning: For ppp to function correctly please ensure that the tty line is enabled. Do you intend that this machine be used as a network gateway. If so, answering Y will turn on the tuneable parameters IPFORWARDING and IPSENDREDIRECTS. y TCP/IP Configuration Complete. Currently configured chains: 1. lmxc->sco_nb->sco_tcp lmxc SCO LAN Manager Client sco_nb SCO TPI NetBIOS for TCP/IP sco_tcp SCO TCP/IP for UNIX 2. nfs->sco_tcp nfs SCO NFS Runtime System for SCO Unix sco_tcp SCO TCP/IP for UNIX 3. sco_tcp->ppp1 sco_tcp SCO TCP/IP for UNIX ppp1 PPP Interface 1 4. sco_tcp->ppp0 sco_tcp SCO TCP/IP for UNIX ppp0 PPP Interface 0 5. sco_tcp->lo0 sco_tcp SCO TCP/IP for UNIX lo0 SCO TCP/IP Loopback driver 6. sco_tcp->sl0 sco_tcp SCO TCP/IP for UNIX sl0 SLIP Interface 0 7. sco_tcp->wdn0 sco_tcp SCO TCP/IP for UNIX wdn0 SMC/WD 8003/8013 Series driver, board 0 Available options: 1. Add a chain 2. Remove a chain 3. Reconfigure an element in a chain q. Quit Select option: q Do you want to relink the kernel now? n #
|